PRODUCT DESCRIPTION
NISOTEC FAVORIT EURO SAE 10W-40 is a high-quality multigrade engine oil, from the XHPD (eXtra High Performance Diesel) group, intended for the lubrication of modern Euro 6, Euro 5 and Euro 4 four-stroke diesel engines of high power, which work under heavy loads and are equipped with exhaust gas aftertreatment systems (SCR) and diesel particulate filters (DPF). Formulated with synthetic base oils and an advanced additive package for long-term wear protection of all moving engine parts, it provides excellent fluidity at low temperatures and viscosity retention at high temperatures. Low Ash Additives (Low SASP) help extend the life and maintain the efficiency of the system to reduce exhaust emissions.

ADVANTAGES

• Low ash content (Low SAPS) - A modern package of additives with a low ash content enables the longevity of the exhaust gas treatment system.
• Excellent properties at low temperatures - Excellent mobility and reduced wear during cold engine start.
• Excellent wear protection - A permanent oil film provides protection against wear in all operating conditions, which enables a long service life of the engine.
• Excellent thermal and oxidation stability - It provides excellent oil resistance to aging and thus enables a longer replacement interval.
• Control of deposits in the engine - Prevents the formation of deposits and sludge in the engine, which enables a longer engine life.
• Long oil change period - A long replacement period reduces maintenance costs and environmental impact.

APPLYING

• Modern four-stroke, heavy-duty, high-power, naturally aspirated or turbocharged diesel engines in which the Low SAPS oil category is recommended.
• Modern diesel engines with extended oil change intervals, which have exhaust gas recirculation (EGR), exhaust gas aftertreatment systems (SCR) and diesel particulate filters (DPF).
• Light and heavy commercial vehicles and modern off-road machinery.

PHYSICO-CHEMICAL CHARACTERISTICS

Typical characteristics	Method	NISOTEC FAVORIT EURO SAE 10W-40
SAE viscosity class	SAE J300	10W-40
Kinematic Viscosity - at 100 °С, mm²/s	ISO 3104	14.5
Viscosity Index	ISO 2909	155
Total Base Number, mg KOH/g	ISO 3771	9.6
Sulfated Ash, wt%	ISO 3987	0.95
Pour Point, °С	ISO 3016	-36
Flash Point (COC), °С	EN ISO 2592	226
Density - at 15 °С, kg/m³	EN ISO 3675	862